PRODUCTS

40000psi pressure rated surface preparation waterjet blasting direct drive pump for URACA Cylinder End Bell

1.Product Introduction of 40000psi pressure rated surface preparation waterjet blasting direct drive pump for URACA Cylinder End Bell

This 40000psi pressure rated surface preparation waterjet blasting direct drive pump for URACA Cylinder End Bell is compatible with the URACA KD725,KD719,Operating Pressure rated up to 2800Bar,Power rating up to 270KW, it is applied with the URACA high pressure Cylinder.

2.Product Parameter (Specification) of 40000psi pressure rated surface preparation waterjet blasting direct drive pump for URACA Cylinder End Bell

The 40000psi pressure rated surface preparation waterjet blasting direct drive pump for URACA Cylinder End Bell is compatible with various models like KD725,KD719, operating pressure rated is 2800Bar,Flow Rate:13-2080LPM, with the URACA High pressure Cylinder.

3.Product Feature And Application of 40000psi pressure rated surface preparation waterjet blasting direct drive pump for URACA Cylinder End Bell

The 40000psi pressure rated surface preparation waterjet blasting direct drive pump for URACA Cylinder End Bell is made of the high-grade stainless Steel with high quality, it is compatible and replaceable with the URACA original. It is featured:

A:Mirror Inside surface process

B:Aerospace-grade stainless steel to made of

C:High Precision Born better finish process.

Application:

This 40000psi pressure rated surface preparation waterjet blasting direct drive pump for URACA Cylinder End Bell is go with the URACA High pressure Cylinder,it can be used in the general surface cleaning, pipeline tubing cleaning, the heat-exchange cleaning, Hydro Painting &Rust cleaning etc.

4.Product Details of 40000psi pressure rated surface preparation waterjet blasting direct drive pump for URACA Cylinder End Bell

5.Product Qualification of 40000psi pressure rated surface preparation waterjet blasting direct drive pump for URACA Cylinder End Bell

Shenzhen Panwin Machinery&Equipment Co.,Ltd are a professional manufacturer specializing Hydro Jet Blasting Cleaning&Cutting machine parts,We strictly controls the whole process of product production according to the quality standard ISO9001-2015 and passed the quality Certificate, Years of experience in the production and design of Ultra-high pressure accessories and machinery, not only We are winning the trust and long-term cooperation of customers, but also accumulated rich design experience and industry sensitivity for us. We have been expanding and innovate to satisfy the market and customers needs and practical applications.

6.Deliver,Shipping And Serving of 40000psi pressure rated surface preparation waterjet blasting direct drive pump for URACA Cylinder End Bell

For the 40Kpsi URACA Cylinder End Bell package we will Pack with utmost Care and ensure security and protection of goods,

A:We used the wooden case and all our wooden case are Plywood case or Wooden case is finished the fumigation treatment under the shipping requirement.

B: Our spare parts are packed and covered some layers by the Waterproof,rust-proof and shock-Proof soft packing material, mainly the 3-5mm thickness foam film etc. We require our packing staff cover thick enough and wrap with the plastic film or adhesive tape tightly to ensure the packing can avoid almost any possible damage in the delivery process.

C:For the fragile,sensitive items, like Plunger, We have the solid plastic box cover some layer by the Waterproof,rust-proof and shock-Proof soft packing material, mainly the 3-5mm thickness foam film etc and wrap with adhesive Tape.

D:Every Wooden Case have the strong and firm feet about 7-10CM length, it is easy to forklift and transport goods.

7.FAQ

11: How many checks are performed on our Hi-pressure Components?

A:Usually, products will go through four inspections Steps, incoming inspection, production first inspection, sampling inspection, and pre-shipment inspection. Among them, sampling inspection will be conducted multiple times

12: What consideration should be take into when we select the Water-jet blasting high pressure hose.

Generally we should consider following four aspects and factors.

1:High Pressure grade and level.

2:The Outside diameter and Inner diameter of high pressure hose.

3:High pressure Hose connector.

4:Protective Device.

8:How often do we need to change the nozzles?

The frequency of replacing the nozzles quite depends on how much time you use your machine. We advise that if you notice a gradual pressure reduction you should check and try to clean the nozzles, and if happen again, you should replace the tip,generally speaking not all tips wear out simultaneously.

8.Company Introduction

Shenzhen Panwin Machinery&Equipment Co.,Ltd are a professional manufacturer specializing Hydro Jet Blasting Cleaning&Cutting machine parts,We strictly controls the whole process of product production according to the quality standard ISO9001-2015 and passed the quality Certificate, Years of experience in the production and design of Ultra-high pressure accessories and machinery, not only We are winning the trust and long-term cooperation of customers, but also accumulated rich design experience and industry sensitivity for us. We have been expanding and innovate to satisfy the market and customers needs and practical applications.